Взаимодействие между ботами

Разобрался сам.
Проблема кроется в БД.
Путем курки форумов было установлено что следует редактировать файл my.cnf

Код:

[mysqld]
bind-address=127.0.0.1
tmpdir=/tmp
character-sets-dir=/usr/local/mysql/share/charsets
default-character-set = cp1251
init-connect = "set names cp1251"
skip-character-set-client-handshake
basedir = /usr/local/mysql/
datadir = /usr/local/mysql/data/

и my.ini

Код:

# Example MySQL config file for very large systems.
#
# This is for a large system with memory of 1G-2G where the system runs mainly
# MySQL.
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:\mysql\data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password	= your_password
port		= 3306
socket		= Z:/tmp/mysql.sock

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
old-passwords
port		= 3306
bind-address = 127.0.0.1
basedir="Z:/usr/local/mysql5/"
datadir="Z:/usr/local/mysql5/Data/"
default-character-set = cp1251
init-connect = "set names cp1251"
skip-character-set-client-handshake
tmpdir = "/tmp"
default-storage-engine = MYISAM
socket		= Z:/tmp/mysql.sock
skip-locking
key_buffer = 384M
max_allowed_packet = 1M
table_cache = 512
sort_buffer_size = 2M
read_buffer_size = 2M
read_rnd_buffer_size = 8M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size = 32M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 8

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
#skip-networking

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id	= 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir		= /tmp/		
#log-update 	= /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 384M
#bdb_max_lock = 100000

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
#innodb_log_arch_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 384M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 100M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
default-character-set=cp1251
character-sets-dir=Z:/usr/local/mysql5/share/charsets

[isamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

Если сменить

Код:

bind-address = 127.0.0.1

на

Код:

bind-address = ваш ip

проблема с подключением к БД решается, однако теперь все кому не лень имеют доступ к БД, кто знает как решить этот вопрос безопаснее?

Если БД и бот установлены на одной машине - ничего менять не нужно.

Все таки хотелось бы узнать как два ghost++ бота поднять чтобы с реалма не выкидывало, разные порты задавал, разные id задал, ники, логины - все разное. И все таки киляет.
Однако тот же GhostOne с ghost++ вполне стабильно работает. Жилизарт открой секрте плз)

Объясни плз еще раз что нуна сделать для ghost ++ 17 мот я чего недопонял

JiLiZART отпиши плз еще раз как правильно настроить пребываение двух ботов, долго искал по форуму старую месагу но так и не нашел, видимо пост ушел со старым форумом.

Скажите плиз, может я не в тему, но все же. Как настроить подсчет игроков и каким образом вообще бот начисляет очки, это скажите в чем разница Score и Rank (переводить ненадо).Я непойму у всех по нулям и там и там, что за фигня. Заранее Спасибо

С советом все норм, проблема в том что ботов PVPGN выкидывает, нeжно что-то поднастроить чтобы пускал с одного ip

есть параметр kick_old_login = true, но это не то он или кикакет старого или не пускает нового, а нужно чтобы пускал обоих
иначе по очереди дисконект получают

Код:

[BNET: USEast] disconnected from battle.net
 [BNET: USEast] waiting 90 seconds to reconnect